Features

  • Floor System: 8” x 6.5 galvanized perimeter I-beam floor frame, 6” R19 fiberglass insulation with vapour barrier, welded fastening galvanized steel 6” x 16 ga joists spaced on 16” centers, ¾” fire-retardant tongue & groove for plywood decking, vinyl composition floor tile & a 4” vinyl base molding
  • Wall System: Welded fastening 18 ga. Galvanized steel studs spaced on 16” centers, headers are 6” x 16 ga. Galvanized steel joists welded on edge, ceiling height is 7’-10” at back, 8’-0” at front, interior wall finish are 5/8” vinyl-faced gypsum panels, 3 ½” R-11 fiberglass insulation with vapour barrier, sheathing is 5/8” fire-retardant exterior grade fir plywood & siding is 26 ga ribbed steel panels with painted finish
  • Roof System: Welded fastening 8” x 16 ga galvanized steel joists spaced on 16” centers, overhang is 18” over front wall, 6’ over rear wall and end walls, R-19 fiberglass insulation with vapour barrier, ceiling panels are 5/8” fire-rated gypsum board, taped and bedded with spray textured finish, roof surface is reinforced skid and spike resistant PVC membrane
  • Roof Guardrail System: Guardrails are 1 5/8” O.D. anodized aluminum pipe alloy, with galvanized steel angle supports, and chain link fence
  • Scorer’s table is an 18” wide x ¾” plywood