Barre double de conditionnement physique de style traditionnel en bois fixée au sol
SE-VV-EFD-48-W
Prix régulier $379.00/
Frais d'expédition calculés lors du passage à la caisse.
Ayant une stabilité optimale, ces barres de style traditionnel est le meilleur choix des danseurs professionnels et amateurs.
Caractéristiques :
- Recommandé pour usage domestique et commercial
- Barre fixée au sol pour une stabilité optimale lorsque sa fixation au mur est impossible, par exemple, devant des miroirs ou des fenêtres.
- Barreaux fabriqués en acier épais recouverts de peinture en poudre d’un fini noir mat légèrement texturé ou argent métallique.
- Ajout d'un support à l'arrière des étançons de plancher pour plus de solidité.
- Barre en bois de style traditionnel et naturel.
- Fabriqué aux États-Unis
- Garantie limitée exclusive de 10 ans
View Adjustable Height diagram here.
View Fixed Height Installation Guide here.
- Longer length barre systems over 8' ship in multiple barre sections.
- The number of brackets required depends on the length of the barre.
- Barres are joined together inside the stanchion collars for a continuous length look.
- Our stock systems are configured for our recommended 4’ floor stanchion spacing. In some cases, bringing the end stanchions in a few inches to allow for some barre overhang may cause the stanchion spacing to be less than 4’ on each end. You may need to purchase a longer barre system.
- Floor stanchions may be placed anywhere along the barre length; however, a stanchion is required wherever barres are joined.
- Hardware for mounting into the floor is not provided as it will depend entirely on your floor type and what your installer feels will mount most securely. Hardware may be purchased at a local hardware or home improvement store.
- When barres meet in a corner take 1’ off each barre dimension so barres do not touch in the corner.
- Wood screws are provided for use underneath each bracket collar to secure the barres.
- Allow at least 2’ per person or more depending on the activity.
View Adjustable Height Installation Guide here.
- Longer length barre systems over 8' ship in multiple barre sections.
- The number of brackets required depends on the length of the barre.
- Barres are joined together inside the stanchion collars for a continuous length look.
- Our stock systems are configured for our recommended 4’ floor stanchion spacing. In some cases, bringing the end stanchions in a few inches to allow for some barre overhang may cause the stanchion spacing to be less than 4’ on each end. You may need to purchase a longer barre system. (See “What's Included”)
- Floor stanchions may be placed anywhere along the barre length; however, a stanchion is required wherever barres are joined.
- Hardware for mounting into the floor is not provided as it will depend entirely on your floor type and what your installer feels will mount most securely. Hardware may be purchased at a local hardware or home improvement store.
- When barres meet in a corner take 1’ off each barre dimension so barres do not touch in the corner.
- Wood screws are provided for use underneath each bracket collar to secure the barres.
- Allow at least 2’ per person or more depending on the activity.
Fixed Height
- Barre: 1-1/2” diameter – ideal for hands of all sizes.
- Barre Finish: Natural Ash Wood
- Height: Baseplate to top of Barre are 42” and 32”
- Stanchion Baseplate: 6” x 6” and has (4) 1/2" diameter holes (so you will need to use 3/8" diameter anchors)
- The distance from the rear edge of the floor stanchion to the front of the barre is approximately 7"
- Weight Capacity: Supports 150 lbs. per linear foot of static weight when properly installed
Adjustable Height
- Barre: 1-1/2” diameter – ideal for hands of all sizes.
- Barre Finish: Natural Ash Wood
- Height: Baseplate to top of Barre is adjustable from 12” to 46”
- Stanchion Baseplate: 6” x 6” and has (4) 1/2" diameter holes (so you will need to use 3/8" diameter anchors - see Guides & Diagrams)
- The distance from the rear edge of the floor stanchion to the front of the barre is approximately 8" (See Guides & Diagrams)
- Weight Capacity: Supports 150 lbs. per linear foot of static weight when properly installed
- PLEASE NOTE: Though the barres are adjustable, they are not designed for frequent adjustments. They are designed to compensate for uneven floors or when the height is unknown. Adjusting these might require more than 1 person. A 7/16" wrench is required to make adjustments.